Search - s3c2410 linux

[Linux-Unix] s3c2410-led

Description: s3c2410 基于linux上的LED实力代码,类似跑马灯-s3c2410 based on the LED power source, similar 5,250
Platform: | Size: 1024 | Author: guicaili | Hits:

[Linux-Unix] ohci-s3c2410

Description: 这是s3c2410USB主机驱动程序,编译linux内核然后烧进2410板-s3c2410USB host driver, compile Linux kernel then burned into the 2410 Plate
Platform: | Size: 4096 | Author: 王庆 | Hits:

[Embeded Linux] arm-linux-gcc3.4.1

Description: arm-linux-gcc编译器，S3C2410开发板移植目前最新的linux2.6.14的内核，需要使用这个编译器编译-arm- linux-gcc compiler, S3C2410 development board transplantation latest linux2.6.14 kernel, need to use the compiler compiler
Platform: | Size: 42745856 | Author: 李雷 | Hits:

[Embeded Linux] SerialPortDesignForS3c2410

Description: 基于s3c2410的串行端口程序设计，带有makefile，可在linux下直接编译-s3c2410 based on the serial ports program design, with makefile. linux under the direct translation
Platform: | Size: 3072 | Author: 赵者 | Hits:

[Embeded Linux] SDDriverForS3c2410

Description: 基于s3c2410的SD驱动，带有makefile，可在linux下直接编译 -s3c2410 based on the SD-driven, with a makefile, linux under the direct translation
Platform: | Size: 24576 | Author: 赵者 | Hits:

[Other] LCDS3C2410-llg

Description: 详细说明s3c2410 mizi linux 上如何移植各种液晶屏(TFT、STN)，以及详细参数说明。-s3c2410 mizi detailed description of how the transplant linux various LCD (TFT, STN), and the parameters that describe in detail.
Platform: | Size: 365568 | Author: zeus | Hits:

[Linux-Unix] s3c2410_ts

Description: 用于s3c2410的linux-2.6内核下的触摸屏驱程-s3c2410 for the linux- 2.6 kernel under way Touchscreen Flooding
Platform: | Size: 4096 | Author: 罗富冲 | Hits:

[Internet-Network] linux-wlan-ng-0.2.5.tar

Description: 对于无线网卡采用prism芯片的linux的开源驱动.-used for the wireless LAN chip linux prism of the revenue-raising drive.
Platform: | Size: 552960 | Author: 陈容 | Hits:

[Linux-Unix] Sourcecodes

Description: Linux环境下的S3C2410中NandFlash基本操作编程-Linux environment under which the S3C2410 NandFlash basic operation Programming
Platform: | Size: 8192 | Author: 勇 | Hits:

[Embeded Linux] arm_sd_driver

Description: 三星S3C2410的linux的SD卡驱动程序-Samsung S3C2410 linux SD Card Driver
Platform: | Size: 24576 | Author: phenix | Hits:

[Embeded Linux] uboot_final.tar

Description: 针对基于LINUX的S3C2410下的BOOTLOADER,u-boot1.1.13,支持NANDFlash,网卡已经移植.调试OK-Based on the Linux S3C2410 the BOOTLOADER. u-boot1.1.13 support NANDFlash, network card has been transplanted. Debugging OK
Platform: | Size: 10464256 | Author: gf | Hits:

[ARM-PowerPC-ColdFire-MIPS] spidmadriver

Description: 本驱动程序在linux2.6.17中测试通过。yangxing msn:lelma_yx@hotmail.com 希望对SPI操作的朋友有所帮助。一、工作方式：从设备：SPI为MASTER模式 S3C2410：SPI为SLAVE模式＋DMA 二、工作流程 1.S3C2410从接收：当从设备发送数据时，S3C2410利用DMA方式收数，收到指定长度的数据，则进入DMA中断，将接收的数据拷出。 2.S3C2410从发送：当S3C2410需要发送，首先由RTS请求发送，然后等待从设备应答CTS，当从设备应答CTS时，进入外部中断，启动DMA发送，发送完成，再次进入从接收状态。三、文件位置 spi_dma_slave.c spi_dma_slave.h circular_buf.c circular_buf.h 等文件存放入driver/char/目录 dma.c存放于arch/arm/mach-s3c2410/目录 dma.h存放于include/arm-asm/mach-s3c2410/目录四、使用环境 1.arm-linux-gcc-3.4.1-the driver linux2.6.17 in which the test. Yangxing msn : lelma_yx@hotmail.com hope to operate SPI friends help. 1, mode of work : from equipment : SPI for the S3C2410 MASTER mode : SPI for SLAVE+ DMA mode 2, workflow 1.S3C2410 from receiving : When sending data from the device, using DMA S3C2410 debt, the length of the designated data DMA will enter the interruption will receive unfettered access to the data. 2.S3C2410 from this : When S3C2410 need this, the first request sent by the RTS, Then wait for the response from CTS equipment, when the equipment response from CTS, access to external interrupt start DMA sent, Send completed, re-entered, from receiving state. 3. Position papers spi_dma_slave.c spi_dma_slave.h circul ar_buf.c circular_buf.h documents onto the driver/char/Contents
Platform: | Size: 17408 | Author: y | Hits:

[Embeded Linux] linux.drivers.examples

Description: 广州友善之臂SBC-2410X所使用的测试程序包，含源代码.linux 的led 按键等驱动-Guangzhou friendliness arm SBC-2410X used in the test procedure kits, with the source code. linux led the drive button, etc.
Platform: | Size: 176128 | Author: 吕春秋 | Hits:

[Linux-Unix] linux11_mig1_11release

Description: 关于嵌入式s3c2410开发平台上linux2.6内核移植以及其驱动程序开发的讲解文档,讲叙的十分清楚,是难得的好文章!-s3c2410 on embedded development platform linux2.6 kernel transplantation and its driver on the development of the document, spoke of the very clearly, it was rare good article!
Platform: | Size: 1026048 | Author: 吴志华 | Hits:

[Software Engineering] LinuxOnS3C2410

Description: 本文较为详细的介绍了将Linux移植到S3C2410平台的过程，十分适合于使用ARM9+Linux开发的初学者阅读。如果可以紧跟本文档中介绍的开发步骤，按部就班的进行实验，相信可以很快的了解嵌入式Linux的移植以及之上驱动程序的编写。-paper detailed introduction to the Linux platform S3C2410 transplant process, very suitable for use ARM9 Linux beginners to read. If we can keep up with this documentation on the development steps, a step-by-step experiments believe can quickly understand Embedded Linux transplantation and the top drivers prepared.
Platform: | Size: 1031168 | Author: 王鑫 | Hits:

[Other] LinuxARMdoc

Description: 嵌入式Linux系统开发技术详解--基于ARM(第1章),真是好文档啊,有点舍不得与你共享.-Embedded Linux Development Hi-- Based on ARM (1), is a good document ah, somewhat reluctant to share with you.
Platform: | Size: 266240 | Author: 曾奇 | Hits:

Category

Source Code

Web/Internet

Develop Tools

Document

Other

Search in results

OS

Platform

Language

File Type

Search list